Tag Archives: tiled roll in shower

Roll In Shower in Fallbrook, CA by Chad Deiter Company

I recently completed a roll in shower for an elderly couple here in Fallbrook ,CA. I am going to briefly explain the process to get this project done.

Step 1 . Removed the old handicap fiberglass enclosure all the way down to the studs.
Step 2. Cut floor joists down 2″ to allow for proper drainage to shower drain. We might have to sister joists to ensure the correct strength. Also added 3/4″ plywood back to the floor as a base for cement.
Step 3. Dry-walled all shower walls after shimming and planing of the studs was complete.
Step 4. Floated the shower pan with dry-pack cement to achieve the proper slope to the Schluter Shower Drain.
Step 5. Installed Schluter Kerdi on new dry-wall and the floated shower pan. This ensures a watertight shower from the pan all the way to the shower head. Must do all corners and shower pan corners are doubled up.
Step 6. Installed the tile and grouted up the shower and floor.

And that’s it now the homeowners have a completely waterproof beautiful roll in shower to use for years to come.

Chad